Description

SyRen 50A Regenerative Motor Driver, universal motor control, effective and easy to use for brushed DC motors. It is suitable for the propulsion of robots up to 110 kg (36 kg for combat robots), for electric vehicles, pumps, automation, etc.

During each slowdown or change of direction of rotation of the motor, the SyRen50 card recharges the battery, allowing an increased autonomy of the robot. It allows sudden changes of direction and quick stops.

The control can be carried out using an analog voltage, an RC signal or a serial signal.

The use of two SyRen50 cards allows differential control (like tanks) without external mixing, thanks to Diff-drive and RC modes. A 5 VDC output is available to power a microcontroller or RC receiver.

It is very important to use wire of adequate cross section given the very high current. Using too small a section wire may result in card destruction and / or fire.

Carefully observe polarity. A polarity reversal will cause the card to be destroyed and the warranty will not apply.

Power supply: 6 to 30 Vdc (NiCd, NiMh, Lithium, Lead Acid)

This card can not be powered by AC power.

Output current: – 50 A continuous (100 A peak)

Control signal:

– Analog voltage 0 to 5 Vdc

– Radio signal RC

– Serial link

Status indication By Leds

Thermal and overload protection

Dimensions: 61 x 58 x 21 mm

Weight: 240 gr

 

Manufacturer: Dimension Engineering

Version: V1

– Technical sheet

–  Arduino Library